Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10

CMC CSR2 Pulley

1.66 LBS
Calculated at checkout

Product Description

NOTE: An important product recall notice has been issued for a small number of CSR2 Pulleys (Part #s 300342, 300343) and CSR2 Pulley Systems (Part #s 500102, 500103, 501201, 501301) manufactured in April and May 2018. Affected lot numbers are 18116-01 through 18138-28.

Download a full copy of the recall notice here.

The design of our redesigned CSR2 (Confined Space Rescue) Pulley is stronger yet lighter and incorporates 7/16 in (11 mm) to 1/2 in (13 mm) life safety rope. Ideal for industrial applications as well as many rescue operations, the CSR2 uses our proprietary, patented locking system, which eliminates a toothed cam or Prusik so it can be easily and safely released while under load. (The absence of the toothed cam means that even if the system is fully collapsed and pulled tight, it can still be released easily. Systems using a toothed cam must be raised even further before the cam can be released, which can be impossible if the system is fully collapsed without thinking about this problem ahead of time – causing potential problems with the load on the system becoming stuck.) An integral thrust-bearing swivel reduces torque by aligning the pulley with the load, thereby increasing efficiency and safety. Its larger size allows for the easy application of rescue-size carabiners.

Machined from a solid block of aircraft-grade aluminum, the CSR2 features a high-strength aluminum side plate, sealed bearings and anodized aluminum sheaves. The side becket location allows for maximum lift height and full retraction of the system, and a removable becket cover facilitates changing out lifeline with sewn terminations.

  • All-new stronger, lighter-weight design
  • Compatible with 11-13 mm life safety rope
  • Meets NFPA 1983 (2017 ED) – General Use
  • CSR2 Pulley MBS 46 kN (10,341 lbf) / CSR2 Double Pulley MBS 45 kN (10,116 lbf)
  • Machined from solid block of aircraft-grade aluminum
  • Made in USA

    CSR2 Pulley 300343 PULLEY, CSR2, CMC 2.5 LB (1.1 KG) 2 1/4 X 1/2 IN (57 X 13 MM) RED / GRAY GENERAL USE 46 KN (10,341 LBF)
    CSR2 Double Pulley 300342 PULLEY, CSR2 DOUBLE, CMC 1.5 LB (680 G) 2 1/4 X 1/2 IN (57 X 13 MM) GRAY GENERAL USE 45 KN (10,116 LBF)

    Product Reviews

    Write Review

    This product hasn't received any reviews yet. Be the first to review this product!

    Find Similar Products by Category

    Customers also viewed